Make sure before carrying out any kind of hot work, the hot work checklist and risk assessment forms have been duly filled. Also, do not forget to follow all safety procedures while carrying out such jobs in enclosed spaces.
30/8/22
One of the main causes of accidents onboard ships is fire. This is because of the presence of high temperature, excess quantity of flammable oil and other combustible materials. A ship is approved to sail in international waters only if it is constructed as per Fire Safety System code and carries required fire fighting Appliances approved by the concerned authority .
12/7/21
Marine Air Compressor system used on board is very important to the marine engineer and without any air the ship would soon become a dead ship. The various parts of the compressed air system, be it the compressors, the pipe lines, or the air bottles have to be maintained in good condition.
1/7/21
There are three different types of lifeboats, each type serves a purpose and is partnered with a vessel that it is compatible with. The following are the three broad types: Open Lifeboat , Closed lifeboat , Free fall lifeboat
9/5/21
The main use of refrigeration plants on ships is to keep cargo and food provisions at low temperature to prevent them from spoiling . The reefer plant is a combination of various machines such as compressor, valves, heat exchangers etc., which are connected to each other through pipes and joints.
11/3/21
The valve communicates at its end point with the flow pressure zone,the two zones being separated by a membrane whose function it is to interconnect the high and low pressure zones in the event of a break due to overpressure.In this manner,loss gas in the circuit is prevented.
9/3/21
The refrigeration system are becoming increasingly important on board ship both to achieve great Crew comfort and for better care of cargoes . The operating principle of all cooling systems is the same in all installations.
8/3/21
Turnbuckles are a diverse product line that are used in a variety of applications across many different industries. They can be used in applications as simple as providing tension in a fence or perimeter cable, or something as complicated as the construction of a suspension bridge.
8/3/21
Most of the motors in the ship’s engine room are continuous running motors connected to a pump or compressor or some other machinery. Like any other mechanical machinery, motors also have their own running hours, after which, the complete overhauling of the motor is to be done to ensure efficient working and performance ...
5/3/21
